Workshop Pricelist

 

FULL SERVICE - £150*

Includes:

  • Bike stripped down to the frame, then cleaned and checked for alignment and damage.
  • Hubs disassembled, cleaned, inspected, then rebuilt with fresh grease, refitted & checked for movement
  • Bottom Bracket removed, cleaned, inspected, then rebuilt with fresh grease, refitted & checked for movement
  • Headset removed, cleaned, inspected, then rebuilt with fresh grease, refitted & checked for movement
  • All other fittings removed, checked for wear, cleaned and re-lubricated replacing all cables and housings
  • Brake blocks / disc pads checked and replaced if required
  • Replacement of any other worn parts if required
  • Safety check (all fittings / mudguards / racks etc. are securely fastened)
  • Chain cleaned and lubricated, gears set up
  • *Does not include parts or servicing of suspension and hydraulic brakes

 

 

GENERAL SERVICE + DRIVETRAIN DEGREASE - £90*

Includes:

  • Frame & forks wiped down and checked for alignment
  • Headset checked for free movement and adjusted if required
  • Bottom Bracket checked for free movement
  • Allen bolts checked and tightened to correct torque
  • External adjustment of all bearings
  • Lubrication of chain, derailleurs & cables
  • Adjustment of brakes and gears
  • Wheel hubs and rims checked for damage and wear
  • Pump and inspect tyres for wear and tear
  • Safety check (all fittings / mudguards / racks etc. are securely fastened)
  • Brakes checked for effective operation and adjusted
  • Drivetrain removed, de-greased, cleaned and checked for wear (chain, cassette, chainset, front and rear derailleur)
  • *Does not include parts or servicing of suspension and hydraulic brakes
  • *Internal cable routing £10 extra per cable 

 

 

SAFETY CHECK SERVICE - £50*

Includes:

  • Frame & forks wiped down and checked for alignment
  • Headset checked for free movement and adjusted if required
  • Bottom Bracket checked for free movement
  • Allen bolts checked and tightened to correct torque
  • External adjustment of all bearings
  • Lubrication of chain, derailleurs & cables
  • Adjustment of brakes and gears
  • Wheel hubs and rims checked for damage and wear
  • Pump and inspect tyres for wear and tear
  • Safety check (all fittings / mudguards / racks etc. are securely fastened)
  • Brakes checked for effective operation and adjusted
  • *Does not include parts or servicing of suspension and hydraulic brakes

 

 

WHEEL BUILDING - £40*

Includes:

  • DT Swiss double butted spokes
  • Silver spokes each £0.85
  • Black spokes each £1.19
  • * We don't build wheels on used components apart from good quality hubs.

 

 

GENERAL MAINTENANCE*

Labor charges:

  • Fit new tube or tyre from £15
  • Fit new rear tube/tyre to hub geared bike from £25
  • Fit new rear tube or tyre (covered in chain guards) from £35
  • True wheel from £15
  • Replace broken spoke and true from £25
  • Brake adjustment (not hydraulic) from £15
  • Fit new wheel (front) from £20
  • Fit new wheel (rear) incl. realignment of gears from £25
  • Hydraulic brake bleeding (each) from £30
  • * Parts are not included

 

 

INDIVIDUAL PARTS REPLACEMENT*

Labour charges:

  • Bottom Bracket Fitting from £30
  • Single hub service from £25
  • Headset including head tube inspection from £25
  • Gear cable from £15
  • Brake blocks or cable from £15
  • Fit new chain, cassette + gears set up from £45
  • Fit new derailleur + gears set up from £25
  • * Parts are not included

 

 

HOURLY LABOR CHARGES

Servicing and building bikes when customers supply components not purchased from London Bicycle Workshop and repairs not included in the above pricelist will be subject to an hourly labor charge

  • Hourly Rate - £80 (including VAT)
  • Full hourly rate will be charged for every hour of service started
  • LBW reserves the right to refuse service when there is reasonable doubt about safety or compatibility of supplied components