Wheels Manufacturing

Wheels Manufacturing Threaded Bottom Bracket SRAM 22 and 24mm AC

£74.99
  • Wheels Manufacturing Threaded Bottom Bracket SRAM 22 and 24mm AC
  • £74.99
  • Out of Stock

    Detailed Description for Wheels Manufacturing Threaded Bottom Bracket SRAM 22 and 24mm AC

    External English (BSA) threaded road bottom bracket for 68mm shells. Wheels Manufacturing use only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable.

    Includes:

    • (2) - Enduro Silicone dust seals
    • (1) - 2.5mm aluminum BB cup spacer
    • (2) - 0.5mm crank spindle spacers
    • (2) - 1.0mm crank spindle spacers
    • (1) - Wave Washer

    Buyers Guide for Wheels Manufacturing Threaded Bottom Bracket SRAM 22 and 24mm AC

    Enduro Angular Contact Sealed Bearings

    Enduro Angular Contact bearings are specifically designed for hubs and bottom brackets. In standard radial bearings, only 3 or 4 balls make contact during the load, at any given time. In Angular Contact bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction, and minimize wear.

    Grade 5 Chromium Steel Balls:

    High precision balls are within 5/1,000,000″ round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.

    52100 High Carbon Chromium Alloy Races:

    Vacuum de-gassed process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.

    Graphite/Nylon Ball Retainers:

    Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    Filled with Rheolube special synthetic grease formulated in the USA, the balls are micro-coated with long lasting protection from friction. "LLB" dual lip groove seals and another external seal with dual lips on both sides and made from the best Silicone material guards from water and dirt penetration.

    Sizing Guide for Wheels Manufacturing Threaded Bottom Bracket SRAM 22 and 24mm AC

    Technical Information for Wheels Manufacturing Threaded Bottom Bracket SRAM 22 and 24mm AC

    • Bearings: Enduro Angular Contact
    • Color: Gray
    • Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI)
    • Bottom Bracket Shell Width (mm): 68mm
    • Bottom Bracket Shell I.D.: 33.6-33.9 mm
    • Crank Spindle Type: GXP (SRAM, Truvativ, Etc.)
    • Crank Spindle Diameter: 22/24mm
    • Weight: 111g

    Wheels Manufacturing's Threaded Bottom Bracket uses Angular Contact Enduro Bearings and is a direct replacement for SRAM/Truvativ GXP Bottom Brackets

  • Brand : Wheels Manufacturing
  • Season :
  • Code :MS08179